The CenturyLink Approved, Actiontec C1000A DSL Modem is one of the best available DSL WiFi modems today. With its new, powerful wireless N radio, gigabit Ethernet switch, dualcore 32-bit processor and capacious amounts of memory (64 MB Flash, 64 MB SDRAM), the C1000A can simultaneously support a wide range of demanding multimedia applications, including online gaming, sharing large files or streaming HD video.
With the C1000A, everything’s already built in, so there’s no need for any other equipment such as a router to complete your networking setup. Because of this, the Actiontec C1000A is one of the more economical options available on the market.
Does the C1000A support Internet Protocol version 6 (IPv6)?
Yes, the Actiontec C1000A does support Internet Protocol version 6 (IPv6).
Ive got CenturyLink DSL/Prism TV. CL wants to "lease" me the C2000a VDSL modem @$14 month. Will this power my Prism cable box over ethernet?
How do I reset my Actiontec C1000A to factory default settings?
There are 2 main methods that we use to reset the C1000A
1st Method: Begin with the unit powered up and with a solid Green Power light. Then, using a small tool depress and hold the Reset button on the back of the device just until you see the color of the Power light change from Green to Amber. We recommend using a Paperclip or pen cartridge. Release the button after the power light turns amber, then wait until your modem reboots (1-2 minutes).
The length of time that the Reset button must be held to accomplish the reset varies from model to model, but as long as the Reset button is released while the power light is Amber the Reset will be successful.
2nd Method: Log into the device, click on Advanced, click on Configuration, click on the Restore button next to “Restore Modem to Factory Default State”. The modem will reset and reboot to factory defaults.
Does this device have parental controls with it?
Yes! There are parental controls built in to the admin settings panel. You can set up all of your preferences after activating with your provider.
I want to use my Linksys WIFI router as the WIFI connection using my C1000a as a DSL modem with the WIFI turned off. Is this possible?
Absolutely! You can access the settings of the modem through the admin panel to disable the built-in wireless. Then, attach your own router using “Bridge Mode” in order to forward the WiFi to the other device.
Nick –
Great DSL modem. It has quite a lot of features built into it. I bought my own so I don’t have to lease from my DSL provider. The biggest tip I can give you is that if you connect this to another router that is beefier for serving your LAN you should put this modem into bridged mode and enter your PPP settings in your other router. That basically makes this modem into a gateway, an edge device. Although for a smaller home this modem/router combo may likely serve all your needs just fine.
RP –
Purchased “used” for a 20mps Centurylink DSL phone line. Works as expected. Box contained the modem and power cord. Did not include directions, phone line, or ethernet cable. Utilized the old cables and installation was easy using Centurylink online instructions. Good buy for the money.